5 New Videos Portraying Different Fabrics Low Temperature Ink Adheres to

5 New Videos Portraying Different Fabrics Low Temperature Ink Adheres to

    1. Low temperature ink blocks dye migration 50% polyester, 50% cotton sweatshirts. Read ‘5 Step Guide for Printing on 50/50 Sweatshirts’ 

2. 4 Tips for Preventing Scorching:

Low temperature ink prevents rayon within tri-blend fabrics from burning. Every screen printer knows that screen-printing requires heat in order to create a print that fully adheres to your substrate. Regular plastisol ink cures at a higher dryer temperature causing brown or scorch marks on synthetic substrates. This destroys the quality of the print. These tips will prevent scorch marks on your final products.
1. Know which substrates that are prone to scorching.
-White or light colored garments
-Lighter weight cottons
-Synthetic fabrics that won’t tolerate heat
Switch to Fusion 180. Prevent scorch marks on your final product by using low cure ink.
2. Cure at a Low Temperature. Fusion 180 cures at 240 degrees for 40 seconds through the dryer. Lowering the temperature of your dryer prevents these marks from occurring and will essentially keep your prints looking crisp, clear, and sharp. With regular Plastisol based ink you have to adjust the speed and heat settings to a lower temperature for a longer period of time, however with Fusion 180 you will not have to make any further adjustments and you would only need to make sure that you are curing at the proper low temperature. This will prevent fabrics from scorching.
3. Adjust your flash cure unit. The temperature of the flash cure unit should be lowered when using Fusion 180 and dealing with fabrics that are likely to scorch. The height of the unit should be raised so the substrate is farther from the pallet.You do not need a catalyst to print with a flash.
4. Remove Scorch Marks. If garments suffer scorch marks under the flash cure unit you do not have to toss them into the pile of damaged garments. White garments CAN have the scorch marks removed by running them through the washing machine or spraying with hydrogen peroxide and water.
Scorching is common for nearly ever screen printing shop and can be avoided by following our simple tips.

 

Read ‘Tips for Preventing Scorching’

 

3. Low temperature ink covers fibers on 100% cotton.Read ‘6 Artwork Mistakes to Avoid’

4. Low temperature ink prevents polyester fabrics from shrinking. Learn more about low temperature ink. 

5. Low temperature ink covers fibers on 100% cotton fabrics.

Please click on the image to read more.

OVERVIEW- All in one screen printing ink -ONE formula to screen print on ALL fabrics

Lowering the temperature of your dryer and using low temperature ink…
-Prevents The Rayon Within Tri-Blend Fabrics from Burning
-Covers Fibers on 100% Cotton
-Blocks Dye Migration on 100% Polyester
-Prevents Nylon or Non Woven Bags from Shrinking
-Adheres to Thicker Fabrics (50/50 Sweatshirts and Raincoats)

-Prevents Scorching

Learn More

Don’t forget to use the code ’20off’
Free domestic freight $150+

Leave a Reply

Your email address will not be published. Required fields are marked *

error

Enjoy this blog? Please spread the word :)